The WP2 reads a range of 125kHz type proximity cards and tokens. These may be from Nortech’s own extensive range of electronic credentials, existing third party cards and tokens, or a combination of both depending upon the application.
The WP2 reader series offer the perfect choice of reader for new installations. The choice of supported interfaces also makes it an excellent cost-effective option for extending existing third party installations and for supporting the use of existing cards and tokens in new access control applications.
Connect
Contact Us
+44 (0)1633 485 533
Supply Voltage: | 5VDC to 16VDC |
Current Requirement: | 70 mA maximum |
Dimensions (mm): | 90 x 90 x 22 (H x W x D) |
Panel Finish: | Stainless steel/black |
Material: | Stainless steel plate with tinted ADC lens, Electronics encapsulated in polycarbonate housing |
Rating: | Encapsulated electronics: IP65 |
Operating Temperature: | -20°C to 50°C Ambient |
Pigtail Cable Length: | 300mm |
Cable Gauge: | 7/0.2, 0.22mm stranded |
Conductors: | 8 core screened |
Reading Range: | Up to 50mm depending upon technology and the type of token or card |
Visual indication: | Dual colour LED (red/green) Normally red - blinks green when token or card is read. Green when signal received from host controller on the LED line (active low) |