DELTAQUEST CONFIGURATION AND DIAGNOSTIC SOFTWARE
'Installation and maintenance made easy'
DQ-SW-01 DeltaQuest Configuration and Diagnostic Software is used for configuring and testing DeltaQuest access controllers when they are installed in a network. The software can be installed on the PC that will host the third-party access control or membership program. This powerful and user-friendly software tool is used to configure all DeltaQuest controllers in the network. It also provides a wide range of testing and device discovery features for both DeltaQuest controllers and existing CRC400 controllers that are on the network.
Request QuotePRODUCT FEATURES & BENEFITS
The Configuration and Diagnostic software is an essential requirement for the installation and subsequent maintenance of a DeltaQuest access control network.
Running on a standard specification PC, it communicates with the master DeltaQuest device using either a USB port or via a TCP/IP network. It provides a user-friendly platform for the configuration and monitoring of all connected devices and the communication network. It provides a full range of functional test tools and allows the uploading of firmware updates to all DeltaQuest devices.
Benefits
- Enable installers to remotely configure each controller in the network
- Names and ID’s can be assigned to each device to help administrators
- Configuration data can be saved and re-applied as necessary
- Configuration data can be used to create PDF reports for reviewing and analysis
- Can discover which devices are connected to the network
- Monitors the status of each device with relation to power supply and alarms
- Communications to and operation of each device can be fully tested
- Firmware upgrades can be carried out remotely
- TCP/IP network parameters can be configured
- Supports existing CRC400 devices
Specifications
| PC platform: | Windows 7 onward |
| Devices supported: | All DeltaQuest and CRC400 access controllers |
| Communications options: | TCP/IP and USB |